-- ********************************************************** -- Definitions apply to -- Device Model: MULTIVIEW STREAM MONITOR 2.26A (05/11/2024) -- File : help.txt (Auto-generated file) -- Supported ASCII COMMANDS -- ********************************************************** -- for more information support@kvarta.net -- Kvarta Soft Ltd (www.kvarta.net) -- ********************************************************** -- *************************************************************************************************************************** -- The 'GENERAL' group; -- *************************************************************************************************************************** MODEL read-only Device model VERSION read-only Firmware version DEVICE_NAME read-write Name of the device(Location) DEVICE_ID read-only Device ID SUPPORT read-only Firmware version CPU_NOW read-only CPU CPU_5MIN_PEAK read-only CPU 5min peak percentage RAM_USED read-only Ram used in MB RAM_USED_PERCENTAGE read-only Ram used in percent DISK_USED read-only Disk used in MB DISK_USED_PERCENTAGE read-only Disc used in percent TEMPERATURE read-only Temperature in degrees celcius SYSTEM_UP_TIME read-only System up time in seconds APP_UP_TIME read-only Application up time in seconds LOG read-write Logs All Ip connections { Disabled(0) Enabled(1) } AUTO_UPDATE read-write Automatic online updates every x days. { Off(0) 1 5 10 30 45 60 90 } AUTO_UPDATE_COUNTER read-write Automatic online updates counter. UPDATE_LOCATION read-write Update location DATETIME read-write Get/Set Date & Time NTP_ON read-write NTP server { Disabled(0) Enabled(1) } NTP_SERVER read-write NTP server url address NTP_BACKUP_SERVER read-write NTP backup server url address NTP_SYNC COMMAND NTP sync now CT_TIMEZONE read-write Timezone string GOOGLE_ANALYTICS read-write Google analytics tag: Ex.: UA-121893620-1 REPORT_TIME_COUNT read-write Reports count ALARM_CHECK_TIME read-write Alarm check time before confirming and sending e-mail or snmp trap. ALARM_SILENT_TIME read-write Silent mode: Suspension of sending alarms (minutes). SHOW_UNCONFIRMED read-write Show unconfirmed alamrs with red(Visualization mode). { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'GENERAL_NET' group; -- *************************************************************************************************************************** DEFAULT_RX_STREAMS_PORT read-write Default UDP/RTP RX streams port. PRIMARY_MANAGEMENT_PORT read-write Default management & internet port. Default Gateway port. MANAGEMENT_FROM_ALL_PORTS read-write Allow management from all ports. { Disabled(0) Enabled(1) } HTTPS read-write HTTPS. Requires server.crt and server.key to be uploaded on the server! { OFF(0) MANUAL(1) AUTO(2) } HTTPS_DELETE COMMAND Delete HTTPS certificates HTTPS_DOMAIN read-write HTTPS domain name (server name) HTTPS_EMAIL read-write HTTPS domain registration email (lets encrypt) HTTPS_AUTO_DO_INSTALL COMMAND Install/Renew HTTPS Auto certificates VLAN_ON read-write VLAN { Disabled(0) Enabled(1) } VLAN_COUNT read-write VLAN Count BANNED_IP_1 read-write Banned IP Address 1 BANNED_IP_2 read-write Banned IP Address 2 BANNED_IP_3 read-write Banned IP Address 3 BANNED_IP_4 read-write Banned IP Address 4 BANNED_IP_5 read-write Banned IP Address 5 -- *************************************************************************************************************************** -- The 'LAN' table; LAN -- *************************************************************************************************************************** LAN(?).IP read-write IP Address LAN(?).MASK read-write Sub. network mask LAN(?).GATEWAY read-write Gateway IP Address LAN(?).DNS read-write DNS Server IP LAN(?).DHCP read-write DHCP { Disabled(0) Enabled(1) } LAN(?).IP_1 read-write IP Address 1 LAN(?).MASK_1 read-write Sub. network mask 1 LAN(?).IP_2 read-write IP Address 2 LAN(?).MASK_2 read-write Sub. network mask 2 LAN(?).IP_3 read-write IP Address 3 LAN(?).MASK_3 read-write Sub. network mask 3 LAN(?).IP_4 read-write IP Address 4 LAN(?).MASK_4 read-write Sub. network mask 4 LAN(?).IP_5 read-write IP Address 5 LAN(?).MASK_5 read-write Sub. network mask 5 LAN(?).ID read-only Reads the device ID LAN(?).STATE read-only Reads the device state LAN(?).LINK read-only Reads the device link state LAN(?).MAC read-only Reads the MAC address LAN(?).CURRENT_IP read-only Reads the current IP address LAN(?).CURRENT_MASK read-only Reads the current sub. network mask LAN(?).CURRENT_GATEWAY read-only Reads the current gateway IP address LAN(?).DHCP_STATUS read-only Reads DHCP status -- *************************************************************************************************************************** -- The 'VLAN' table; VLAN -- *************************************************************************************************************************** VLAN(?).VLAN read-write VLAN ID VLAN(?).ETHERNET read-write VLAN ETHERNET -- *************************************************************************************************************************** -- The 'USER' table; Web Users -- *************************************************************************************************************************** USER(?).ACCESS read-write User access { Disabled(0) Enabled(1) } USER(?).USERNAME read-write Username USER(?).PASSWORD write-only Password USER(?).WRITE read-write Write permission { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'TCP' table; TCP UDP Ports -- *************************************************************************************************************************** TCP(?).TYPE read-write Remote port type { OFF(0) TCP(1) UDP(2) } TCP(?).PORT read-write Remote port TCP/UDP port number TCP(?).FILTER read-write Remote port input IP filter TCP(?).PROTOCOL read-write Remote port protocol { OFF(0) ASCII(1) SNMP(2) } -- *************************************************************************************************************************** -- The 'SNMP' group; SNMP -- *************************************************************************************************************************** SNMP.SERVER read-write SNMP Server { Disabled(0) Enabled(1) } SNMP.SNMP_V1_V2_ACCESS read-write SNMP v1,2c access { Disabled(0) Enabled(1) } SNMP.RO_PASSWORD write-only SNMP v1,2c read only community string SNMP.RW_PASSWORD write-only SNMP v1,2c read write community string SNMP.TRAP_PASSWORD write-only SNMP v1,2c trap password SNMP.ENGINE_ID read-write SNMP v3 Engine ID -- *************************************************************************************************************************** -- The 'SNMP_USER' table; SNMP Users -- *************************************************************************************************************************** SNMP_USER(?).ACCESS read-write User access { Disabled(0) Enabled(1) } SNMP_USER(?).USERNAME read-write Username SNMP_USER(?).WRITE read-write Write permission { Disabled(0) Enabled(1) } SNMP_USER(?).SECURITY read-write Security mode { noAuthnoPriv(0) authNoPriv(1) authPriv(3) } SNMP_USER(?).AUTH_ENC read-write Auth encryption { MD5(0) SHA(1) SHA224(2) SHA256(3) SHA384(4) SHA512(5) } SNMP_USER(?).AUTH_PASS write-only Auth password SNMP_USER(?).PRIV_ENC read-write Priv encryption { DES(0) AES(1) AES192(2) AES256(3) DES3(4) } SNMP_USER(?).PRIV_PASS write-only Priv password SNMP_USER(?).PRIV_EXTEND read-write AES192/256 Privacy extend with engineID { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'SNMP_TRAP' table; SNMP Trap servers -- *************************************************************************************************************************** SNMP_TRAP(?).IP read-write Trap server IP SNMP_TRAP(?).PORT read-write Trap server port SNMP_TRAP(?).TYPE read-write Trap server type { Off(0) SNMPv1(1) SNMPv2c(2) SNMPv3User1(31) SNMPv3User2(32) SNMPv3User3(33) SNMPv3User4(34) } -- *************************************************************************************************************************** -- The 'SMTP' group; -- *************************************************************************************************************************** SMTP.SEND COMMAND SMTP Send e-mail command SMTP.ALARM read-write SMTP e-mail alarms { Disabled(0) Enabled(1) } SMTP.REPORT read-write SMTP e-mail alarms report { Disabled(0) Enabled(1) } SMTP.SERVER read-write SMTP server url address SMTP.AUTH read-write SMTP authentication { Disabled(0) Enabled(1) } SMTP.USER read-write SMTP authentication username SMTP.PASSWORD write-only SMTP authentication password SMTP.SSL read-write SMTP SSL { Off(0) On(1) } SMTP.FROM read-write E-mail From address SMTP.TO read-write E-mail To address SMTP.CC read-write E-mail CC address SMTP.BCC read-write E-mail BCC address SMTP.SUBJECT read-write E-mail subject.Macro and can be used. SMTP.TEXT read-write E-mail signature -- *************************************************************************************************************************** -- The 'REPORT_TIME' table; REPORT_TIME -- *************************************************************************************************************************** REPORT_TIME(?).ENABLED read-write Report enabled { Disabled(0) Enabled(1) } REPORT_TIME(?).WEEKDAY read-write Weekday { Off(0) Monday(1) Tuesday(2) Wednesday(3) Thursday(4) Friday(5) Saturday(6) Sunday(7) Everyday(10) Weekday(11) Weekend(12) } REPORT_TIME(?).TIME read-write Hour minute -- *************************************************************************************************************************** -- The 'SOUND_ALARM' group; -- *************************************************************************************************************************** SOUND_ALARM.SOUND_ALARM read-write Sound alarms { Disabled(0) Enabled(1) } SOUND_ALARM.SOUND_PERIOD read-write Sound alarm every X seconds if there is alarm on the device. SOUND_ALARM.BEEP_FREQUENCY read-write Sound alarm beep frequency 40HZ - 6000Hz (Default:1000Hz) SOUND_ALARM.BEEP_TYPE read-write Sound alarm beep type (Default:0,sine) { sine(0) square(1) sawtooth(2) triangle(3) } SOUND_ALARM.BEEP_VOLUME read-write Sound alarm beep volume 0-100% SOUND_ALARM.BEEP_DURATION read-write Sound alarm beep duration 0-5000ms (Default: 250ms) -- *************************************************************************************************************************** -- The 'COMMANDS' group; -- *************************************************************************************************************************** RESTART_NETWORK COMMAND Restart of all network interfaces RESTART_LAN COMMAND Restart of all LAN interfaces RESET_NETWORK_NAMES_OLD COMMAND Set network names to eth0,eth1,etc. RESET_NETWORK_NAMES_DEFAULT COMMAND Set network names default to os. RESTART_ALARMS COMMAND Software reboot of the device REBOOT COMMAND OS Reboot RESTART COMMAND Software reboot of the device FACTORY_RESET COMMAND Software reset (except IP) and reboot of the device UPDATE_AVAILABLE read-only Reads if there is update available { Disabled(0) Enabled(1) } UPDATE_START write-only Starts the update { Disabled(0) Enabled(1) } ONLINE_UPDATE write-only Download update from www.kvarta.net { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'SYSTEM_ALARMS' table; System alarms -- *************************************************************************************************************************** SYSTEM_ALARMS(?).CPU_HIGH_ALARM read-write System CPU high alarm threshold in Kbps SYSTEM_ALARMS(?).CPU_HIGH_ALARM_ON read-write System CPU high alarm { Disabled(0) Enabled(1) } SYSTEM_ALARMS(?).RAM_HIGH_ALARM read-write System RAM high alarm threshold in Kbps SYSTEM_ALARMS(?).RAM_HIGH_ALARM_ON read-write System RAM high alarm { Disabled(0) Enabled(1) } SYSTEM_ALARMS(?).DISK_HIGH_ALARM read-write System DISK high alarm threshold in Kbps SYSTEM_ALARMS(?).DISK_HIGH_ALARM_ON read-write System DISK high alarm { Disabled(0) Enabled(1) } SYSTEM_ALARMS(?).TEMP_HIGH_ALARM read-write System Temperature high alarm threshold in Kbps SYSTEM_ALARMS(?).TEMP_HIGH_ALARM_ON read-write System Temperature high alarm { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'ACTIVE_ALARMS' table; Currently active alarms -- *************************************************************************************************************************** ACTIVE_ALARMS(?).DATETIME read-only Alarm time ACTIVE_ALARMS(?).ALARM read-only Alarm message ACTIVE_ALARMS(?).MODE read-only Alarm mode ACTIVE_ALARMS(?).NAME read-only Alarm frequency/name ACTIVE_ALARMS(?).VALUE read-only Alarm value ACTIVE_ALARMS(?).THRESHOLD read-only Alarm threshold ACTIVE_ALARMS(?).CONFIRMED read-only Alarm confirmed -- *************************************************************************************************************************** -- The 'LOGGED_ALARMS' table; Latest logged alarms after reboot -- *************************************************************************************************************************** LOGGED_ALARMS(?).ID read-only Alarm ID LOGGED_ALARMS(?).DATETIME read-only Alarm time LOGGED_ALARMS(?).MESSAGE read-only Alarm message LOGGED_ALARMS(?).COLOR read-only Alarm color LOGGED_ALARMS(?).EMAIL read-only Alarm email sent flag LOGGED_ALARMS(?).TRAP read-only Alarm trap sent flag -- *************************************************************************************************************************** -- The 'MISC' group; Misc commands -- *************************************************************************************************************************** AUTO_ADD_PROGRAMS read-write Auto add new programs { Disabled(0) Enabled(1) } AUTO_DELETE_PROGRAMS read-write Auto delete programs not found in PAT/PMT { Disabled(0) Enabled(1) } AUTO_RENAME_PROGRAMS read-write Auto update program names if changed in SDT { Disabled(0) Enabled(1) } INSTALL write-only IPTV Install { Disabled(0) Enabled(1) } INSTALL_RANGE read-write IPTV Install Range UPDATE_PROGRAMS_ALL COMMAND Update all programs from streams { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'HLS_PROFILE' table; HLS profiles -- *************************************************************************************************************************** HLS_PROFILE(?).HLS_MODE read-write HLS mode 0=native,1=ffmpeg { NATIVE(0) FFMPEG(1) FFMPEGAAC(2) } HLS_PROFILE(?).HLS_PLAYLIST read-write HLS playlist filename HLS_PROFILE(?).HLS_CHUNK_TIME read-write HLS Chunk Time HLS_PROFILE(?).HLS_CHUNK_COUNT read-write HLS Chunk Count -- *************************************************************************************************************************** -- The 'RX' table; RX streams -- *************************************************************************************************************************** RX(?).ID read-write Rx stream ID RX(?).URL read-write URL string RX(?).NAME read-write Name string RX(?).PROFILE read-write Alarm profile RX(?).VLAN read-write VLAN Map Index RX(?).HLS_INDEX read-write HLS Stream index in the master file RX(?).PID_SKIP read-write Pid Skip List RX(?).TYPE read-write Type UDP/RTP/HLS RX(?).ENABLED read-write enabled { Disabled(0) Enabled(1) } RX(?).RADIO_TRANSCODE read-write HTTP Radio Transcoode Config { Original(0) AAC(1) MP3(2) } RX(?).ADD_PROGRAM write-only add program RX(?).MPEG_REFRESH write-only mpeg refresh RX(?).TS_SAVE_TIME read-write TS Recording time in seconds 1 - 300 seconds RX(?).TS_SAVE_STATE read-only TS Recording state RX(?).TS_SAVE_START read-write Start/Stop recording { Disabled(0) Enabled(1) } RX(?).PROGRAM(?) read-write Rx stream programs array RX(?).NAME(?) write-only Rx stream program name RX(?).PROGRAM_PROFILE(?) write-only Rx stream program alarm RX(?).RADIO(?) write-only Rx stream program is radio RX(?).PROGRAM_DELETE(?) write-only Rx stream program delete RX(?).PROGRAM_UPDATE(?) write-only Rx stream program auto 1=add/2=delete/4=rename/7=all RX(?).UPDATE_PROGRAMS COMMAND Update programs list from mpeg tables RX(?).ADD COMMAND Command to add new rx stream RX(?).DELETE COMMAND Command to delete rx stream -- *************************************************************************************************************************** -- The 'TX' table; TX streams -- *************************************************************************************************************************** TX(?).URL read-write URL string TX(?).RX_ID read-write rx ID TX(?).SID read-write SID TX(?).MODE read-write Stream modes : OFF/SPTS/MPTS/EPG TX(?).VLAN read-write VLAN Map Index TX(?).ADD write-only Command to add new tx stream TX(?).DELETE COMMAND Command to delete tx stream TX(?).ENABLED read-write enabled { Disabled(0) Enabled(1) } TX(?).PROTOCOL read-write Tx protocol UDP/RTP(0) or HLS(1) TX(?).ID read-write Tx ID TX(?).HLS_PROFILE read-write HLS Profile TX(?).REMUX read-write Remux { Disabled(0) Enabled(1) } TX(?).SDT_EN read-write Stream SDT table On/Off { Disabled(0) Enabled(1) } TX(?).EIT_EN read-write Stream EIT table On/Off { Disabled(0) Enabled(1) } TX(?).TDT_EN read-write Stream TDT table On/Off { Disabled(0) Enabled(1) } TX(?).OUT_TS_ID read-write Output TS ID TX(?).OUT_SID read-write Output SID TX(?).OUT_NET_ID read-write Output TS ID TX(?).OUT_PMT_PID read-write Output PMT PID TX(?).OUT_PCR_PID read-write Output PCR PID TX(?).ES_COUNT read-write ES Count TX(?).IN_PID(?) read-write ES Input PID TX(?).OUT_PID(?) read-write ES Output PID TX(?).NAME read-write Name string -- *************************************************************************************************************************** -- The 'PROGRAMS' table; Service/Program measurements -- *************************************************************************************************************************** PROGRAMS(?).NAME read-only Program/Service Name PROGRAMS(?).SID read-only Program/Service SID PROGRAMS(?).AUDIO_BITRATE read-only Program/Service Audio Bitrate PROGRAMS(?).VIDEO_BITRATE read-only Program/Service Video Bitrate PROGRAMS(?).TOTAL_BITRATE read-only Program/Service Total Bitrate PROGRAMS(?).CC_ERRORS read-only Program/Service CC Errors -- *************************************************************************************************************************** -- The 'MPEG_ADVANCED' table; Advanced MPEG alarms -- *************************************************************************************************************************** MPEG_ADVANCED(?).TS_LOCK_ON read-write Priority 1,TS Lock alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).PAT_TIMEOUT read-write Priority 1,PAT timeout in ms,Default:600ms MPEG_ADVANCED(?).PAT_ON read-write Priority 1,PAT alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).CC_ON read-write Priority 1,CC alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).PMT_TIMEOUT read-write Priority 1,PMT timeout in ms,Default:600ms MPEG_ADVANCED(?).PMT_ON read-write Priority 1,PMT alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).PID_ON read-write Priority 1,PID alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).TRANSPORT_ERROR_ON read-write Priority 2,Transport error alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).CRC_ON read-write Priority 2,CRC alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).PCR_TIMEOUT read-write Priority 2,PCR timeout in ms,Default:50ms MPEG_ADVANCED(?).PCR_ON read-write Priority 2,PCR alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).PTS_TIMEOUT read-write Priority 2,PTS timeout in ms,Default:800ms MPEG_ADVANCED(?).PTS_ON read-write Priority 2,PTS alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).CAT_ON read-write Priority 2,CAT alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).NIT_TIMEOUT read-write Priority 3,NIT timeout in ms,Default:10000ms MPEG_ADVANCED(?).NIT_ON read-write Priority 3,NIT alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).SI_ON read-write Priority 3,SI alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).UNREF_PID_ON read-write Priority 3,Unreferenced pid alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).SDT_TIMEOUT read-write Priority 3,SDT timeout in ms,Default:2500ms MPEG_ADVANCED(?).SDT_ON read-write Priority 3,SDT alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).EIT_TIMEOUT read-write Priority 3,EIT timeout in ms,Default:2500ms MPEG_ADVANCED(?).EIT_ON read-write Priority 3,EIT alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).RST_ON read-write Priority 3,RST alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).TDT_TIMEOUT read-write Priority 3,TDT timeout in ms,Default:31000ms MPEG_ADVANCED(?).TDT_ON read-write Priority 3,TDT alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).NIT_COMPLETE_TIMEOUT read-write Priority 3,NIT complete timeout in seconds,Default:80seconds MPEG_ADVANCED(?).ECM_TIMEOUT read-write CA System,ECM timeout in ms,Default:500ms MPEG_ADVANCED(?).ECM_ON read-write CA System,ECM alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).SCRAMBLING_TIMEOUT read-write CA System,Scrambling change timeout in ms,Default:15000ms MPEG_ADVANCED(?).SCRAMBLING_ON read-write CA System,Scrambling change alarm { Disabled(0) Enabled(1) } MPEG_ADVANCED(?).EMM_BITRATE read-write CA System,EMM bitrate alarm minimum bitrate in kbps,Default:50kbps MPEG_ADVANCED(?).EMM_BITRATE_ON read-write CA System,EMM bitrate alarm { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'SERVICE' table; Service/Program alarms -- *************************************************************************************************************************** SERVICE(?).SERVICE_LOW_ALARM read-write Service bitrate low alarm threshold in Kbps SERVICE(?).SERVICE_LOW_ALARM_ON read-write Service bitrate low alarm { Disabled(0) Enabled(1) } SERVICE(?).SERVICE_LOW_WARNING read-write Service bitrate low warning threshold in Kbps SERVICE(?).SERVICE_LOW_WARNING_ON read-write Service bitrate low warning { Disabled(0) Enabled(1) } SERVICE(?).AUDIO_LOW_ALARM read-write Audio bitrate low alarm threshold in Kbps SERVICE(?).AUDIO_LOW_ALARM_ON read-write Audio bitrate low alarm { Disabled(0) Enabled(1) } SERVICE(?).AUDIO_LOW_WARNING read-write Audio bitrate low warning threshold in Kbps SERVICE(?).AUDIO_LOW_WARNING_ON read-write Audio bitrate low warning { Disabled(0) Enabled(1) } SERVICE(?).VIDEO_LOW_ALARM read-write Video bitrate low alarm threshold in Kbps SERVICE(?).VIDEO_LOW_ALARM_ON read-write Video bitrate low alarm { Disabled(0) Enabled(1) } SERVICE(?).VIDEO_LOW_WARNING read-write Video bitrate low warning threshold in Kbps SERVICE(?).VIDEO_LOW_WARNING_ON read-write Video bitrate low warning { Disabled(0) Enabled(1) } SERVICE(?).SERVICE_CC_HIGH_ALARM read-write Service CC errors alarm high threshold SERVICE(?).SERVICE_CC_HIGH_ALARM_ON read-write Service CC errors alarm high { Disabled(0) Enabled(1) } SERVICE(?).SERVICE_CC_HIGH_WARNING read-write Service CC errors warning high threshold SERVICE(?).SERVICE_CC_HIGH_WARNING_ON read-write Service CC errors warning high { Disabled(0) Enabled(1) } SERVICE(?).AUDIO_FREEZE read-write Audio freeze threshold SERVICE(?).AUDIO_FREEZE_ON read-write Audio freeze alarm { Disabled(0) Enabled(1) } SERVICE(?).VIDEO_FREEZE read-write Video freeze threshold SERVICE(?).VIDEO_FREEZE_ON read-write Video freeze alarm { Disabled(0) Enabled(1) } SERVICE(?).VIDEO_FREEZE_DIFF read-write Video freeze threshold difference SERVICE(?).NAME read-write Service profile name SERVICE(?).SEND_EMAILS read-write Send emails on/off { Disabled(0) Enabled(1) } SERVICE(?).SEND_TRAPS read-write Send traps on/off { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'STREAM' table; Stream alarms -- *************************************************************************************************************************** STREAM(?).BITRATE_LOW_ALARM read-write Bitrate low alarm threshold in Kbps STREAM(?).BITRATE_LOW_ALARM_ON read-only Bitrate low alarm { Disabled(0) Enabled(1) } STREAM(?).BITRATE_LOW_WARNING read-write Bitrate low warning threshold in Kbps STREAM(?).BITRATE_LOW_WARNING_ON read-write Bitrate low warning { Disabled(0) Enabled(1) } STREAM(?).RTP_HIGH_ALARM read-write RTP errors alarm high threshold STREAM(?).RTP_HIGH_ALARM_ON read-write RTP errors alarm high { Disabled(0) Enabled(1) } STREAM(?).RTP_HIGH_WARNING read-write RTP errors warning high threshold STREAM(?).RTP_HIGH_WARNING_ON read-write RTP errors warning high { Disabled(0) Enabled(1) } STREAM(?).CC_HIGH_ALARM read-write CC errors alarm high threshold STREAM(?).CC_HIGH_ALARM_ON read-write CC errors alarm high { Disabled(0) Enabled(1) } STREAM(?).CC_HIGH_WARNING read-write CC errors warning high threshold STREAM(?).CC_HIGH_WARNING_ON read-write CC errors warning high { Disabled(0) Enabled(1) } STREAM(?).DELAY_HIGH_ALARM read-write Delay alarm high threshold in ms STREAM(?).DELAY_HIGH_ALARM_ON read-write Delay alarm high threshold { Disabled(0) Enabled(1) } STREAM(?).DELAY_HIGH_WARNING read-write Delay warning high threshold in ms STREAM(?).DELAY_HIGH_WARNING_ON read-write Delay warning high { Disabled(0) Enabled(1) } STREAM(?).NAME read-write Alarm profile name. STREAM(?).SEND_EMAILS read-write Send emails on/off { Disabled(0) Enabled(1) } STREAM(?).SEND_TRAPS read-write Send traps on/off { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'HLS_ALARMS' table; HLS alarms -- *************************************************************************************************************************** HLS_ALARMS(?).PLAYLIST_CHECK_ON read-write Playlist check alarm { Disabled(0) Enabled(1) } HLS_ALARMS(?).CHUNK_CHECK_ON read-write Chunk check alarm { Disabled(0) Enabled(1) } HLS_ALARMS(?).DTS_CHECK_ON read-write DTS check alarm { Disabled(0) Enabled(1) } HLS_ALARMS(?).PTS_CHECK_ON read-write PTS check alarm { Disabled(0) Enabled(1) } HLS_ALARMS(?).DTS_CHECK_HIGH read-write DTS Delta high default 500 ms HLS_ALARMS(?).PTS_CHECK_HIGH read-write PTS Delta high default 500 ms HLS_ALARMS(?).PAT_CHECK_ON read-write PAT check alarm { Disabled(0) Enabled(1) } HLS_ALARMS(?).PMT_CHECK_ON read-write PMT check alarm { Disabled(0) Enabled(1) } HLS_ALARMS(?).SDT_CHECK_ON read-write SDT check alarm { Disabled(0) Enabled(1) } HLS_ALARMS(?).CC_CHECK_ON read-write CC check alarm { Disabled(0) Enabled(1) } HLS_ALARMS(?).CRC_CHECK_ON read-write CRC check alarm { Disabled(0) Enabled(1) } HLS_ALARMS(?).BUFFER_LOW read-write Buffer low threshold in ms HLS_ALARMS(?).BUFFER_LOW_ON read-write Buffer low threshold { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'DEVICE_LIST' table; Device list -- *************************************************************************************************************************** DEVICE_LIST(?).URL read-write Device URL string DEVICE_LIST(?).USER read-write Device username DEVICE_LIST(?).PASSWORD write-only Device password DEVICE_LIST(?).NAME read-write Name string DEVICE_LIST(?).SN read-write Serial number string DEVICE_LIST(?).MODEL read-write Device model name DEVICE_LIST(?).VERSION read-write Device version DEVICE_LIST(?).FOLDER read-write Folder for proxy DEVICE_LIST(?).ENABLED read-write enabled { Disabled(0) Enabled(1) } DEVICE_LIST(?).ADD COMMAND Command to add new child device DEVICE_LIST(?).DELETE COMMAND Command to delete child device -- *************************************************************************************************************************** -- The 'DEVICE_ALARMS' table; Multidevice Monitoring alarms -- *************************************************************************************************************************** DEVICE_ALARMS(?).DEVICE_CHECK_ON read-write Multidevice check alarm { Disabled(0) Enabled(1) } -- *************************************************************************************************************************** -- The 'MVIEW' group; Multiview general configs -- *************************************************************************************************************************** COUNT read-only Multiview count -- *************************************************************************************************************************** -- The 'MULTIVIEW' table; Multiview configs -- *************************************************************************************************************************** MULTIVIEW(?).NAME read-write Multiview name/title MULTIVIEW(?).DETAILS read-write Multiview details MULTIVIEW(?).AUDIO_INDEX read-write Multiview audio index MULTIVIEW(?).AUDIO_SUBINDEX read-write Multiview audio sub index (language) MULTIVIEW(?).HLS_ENABLE read-write Multiview hls live view { Disabled(0) Enabled(1) } MULTIVIEW(?).MODE read-write Multiview Mode { OFF(0) MULTIVIEW(1) } MULTIVIEW(?).SID read-write Multiview SID MULTIVIEW(?).PMT_PID read-write Multiview PMT PID MULTIVIEW(?).ES_START_PID read-write Multiview ES start PID MULTIVIEW(?).ORIGINAL_TSID read-write Multiview original TSID MULTIVIEW(?).TSID read-write Multiview TSID MULTIVIEW(?).SERVICE_PROVIDER read-write Multiview service provider MULTIVIEW(?).BITRATE read-write Multiview encoding bitrate (Kbps) MULTIVIEW(?).QUALITY read-write Multiview encoding quality MULTIVIEW(?).ENCODER_RESTART write-only Multiview encoder restart flag MULTIVIEW(?).SOURCE(?) read-write Multiview source 0-memory,1-http,2-file MULTIVIEW(?).LINK(?) read-write Multiview url/file MULTIVIEW(?).RX_ID(?) read-write Multiview rxid MULTIVIEW(?).CHANNEL_SID(?) read-write Multiview SID MULTIVIEW(?).SIZE(?) read-write Multiview size MULTIVIEW(?).LOCATION(?) read-write Multiview location 0-63 MULTIVIEW(?).DELETE_CHANNEL(?) write-only Multiview delete channel